There are these possible causes: 1 The settings in the marking software are wrong. 2 The frequency signal of the marking card is not output, the chip is faulty. 3 Wrong mode selection for Q-switch driver. 4 Q switch driver selection does not distinguish between internal control and external control. 5 The output RF signal… Continue reading Why can’t the frequency of laser marking machine be adjusted up?
FAQs about Laser Marking
What should be paid attention to in the installation of fiber laser marking machine?
1. When installing, the main components to be considered are the metal plate and the solid workpiece, the machined part, the mechanical connection between the spring washer and the washer. If necessary, make sure that there are certain screws that will not loose. 2. For the electronic control device, the main consideration is that the… Continue reading What should be paid attention to in the installation of fiber laser marking machine?
How is the speed of fiber laser marking machine affected?
There are two main factors affecting the speed of fiber laser marking machine: 1. Internal factors The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power, processing auxiliary gas, material, etc. The internal factor is mainly noticed when selecting the model in the early stage, and the choice should… Continue reading How is the speed of fiber laser marking machine affected?
What is the difference between fiber laser marking machine and co2 laser marking machine?
1. Mechanical performance parameters and characteristics. Fiber laser marking machine: The electro-optical conversion efficiency is high. The power consumption of the whole machine is less than 500W, which is 1/10 of the lamp-pumped solid-state laser marking machine, greatly saving energy consumption. The processing speed is fast, which is 2-3 times that of the traditional marking… Continue reading What is the difference between fiber laser marking machine and co2 laser marking machine?
Why is UV laser marking machine more expensive than fiber laser marking machine?
The structure of UV laser marking machine is the same as that of fiber laser marking machine. It is composed of ultraviolet laser, galvanometer, lens, industrial control machine, control card, workbench shell, electrical control equipment, power supply, red light, foot pedal, combined surgery mirror and other original components. So why is the price of UV… Continue reading Why is UV laser marking machine more expensive than fiber laser marking machine?
How to wipe the laser lens of laser marking machine?
1.Wash your hands first, then blow dry or leave to dry. 2. Put on finger cots. 3. Gently remove the lens to check. 4. Blow off the dust on the surface of the lens with an air ball or nitrogen. 5. Use a cotton ball dipped in lens swabbing solution to stick the residue on it. 6. Drop an appropriate… Continue reading How to wipe the laser lens of laser marking machine?
Why can laser marking machine print multiple colors?
In fact, ordinary laser marking machines cannot produce color effects. Mainly because it recognizes the effect by the depth created by the instantaneous vaporization of the surface of the material by the high temperature generated by the laser focusing. However, there is a color laser marking machine. The main reason for this is the use… Continue reading Why can laser marking machine print multiple colors?
Why is laser marking machine especially suitable for the automated processing industry?
Laser marking is a marking method that uses a high-energy-density laser to locally irradiate the workpiece to vaporize or change the color of the surface material, thereby leaving a permanent mark. More importantly, because of the good spatial controllability and time controllability of the laser, the degree of freedom of the material, shape, size and… Continue reading Why is laser marking machine especially suitable for the automated processing industry?
Does the fiber laser marking machine have a long service life?
Fiber laser marking machine has the advantages of fast marking speed, long service life and low equipment failure rate. For example, the service life of the semiconductor laser marking machine is about 20,000 hours, while the service life of the fiber laser marking machine is about 100,000 hours. Overall, as long as you pay attention… Continue reading Does the fiber laser marking machine have a long service life?